How do I reset my 3COM administrator password?

How to factory reset 3COM switch

1. Forgot your login password and want to do a password recovery? Factory reset to default!
2. Connect to the console port of the switch.
3. Press Ctrl-B to enter the boot menu.
4. Enter 7 to skip current configuration file.
5. Enter 0 to reboot.
6. Once booted, delete the 3comoscfg.
7. Reboot and you’re done!

How do I connect my 3COM switch?

Connecting Your Equipment Connect an Ethernet cable to the 3Com Switch in any available port. Connect the other end of the Ethernet cable directly to your computer or router. **NOTE: Only one internet device can be connected to the 3Com Switch.

How do I reset my 3Com Baseline Switch 2024?

Reset 3COM Switch to Factory Defaults (Forgot Password)

1. Connect a Cisco (light blue) console cable between a computer (serial) and the 3COM switch (RJ45 console port)
2. Open PUTTY with a serial connection and the following settings (38400, 8, 1, N)
3. Power on the 3COM switch and wait for the “Starting…..”

What is a 3Com switch?

Product description. 3Com Baseline switches provide cost-effective layer 2 10/100 and10/100/1000 Ethernet switching for LANs that do not need managementcapabilities. Simple to install and economical to own, they feature wirespeedperformance on fixed-configuration, rack-mountable platforms.

How do I find my password for my WiFi administrator?

First: Check Your Router’s Default Password

1. Check your router’s default password, usually printed on a sticker on the router.
2. In Windows, head to Network and Sharing Center, click on your Wi-Fi network, and head to Wireless Properties > Security to see your Network Security Key.

Is 3Com still in business?

3Com Corporation was a digital electronics manufacturer best known for its computer network products. The company was co-founded in 1979 by Robert Metcalfe, Howard Charney and others. On April 12, 2010, Hewlett-Packard completed the acquisition of 3Com, and it no longer exists as a separate entity.

How to reset 3Com switch to factory defaults?

To perform the factory default reset of the switch I did the following: 1. Connect a Cisco (light blue) console cable between a computer (serial) and the 3COM switch (RJ45 console port) 2. Open PUTTY with a serial connection and the following settings (38400, 8, 1, N) 3. Power on the 3COM switch and wait for the “Starting…..”.

How to reset your 3Com Superstack switch password?

To Factory Reset your switch, which will include setting resetting the password, On older 3Com SuperStack switches (like the SuperStack II 9300 and 3000) use: Login: 3comcso. Password: RIP000.

How to reset the password on a 3Com swictch 4200g 3848?

SOLVED: How to Reset The Password on a 3Com Swictch 4200G 3848… To Factory Reset your switch, which will include setting resetting the password, On newer 3Com SuperStack switches (like the SuperStack 3 3848 and 4200G) use: Get a serial console cable.

How to set the IP address on a 3Com switch?

Windows Vista and 7 removed HyperTerminal (which is quite annoying) but you can download a free, fully functional version for 30 days from hilgraeve.com/hyperterminal-trial . Start your HyperTerminal using the following settings: connect using COM1 (or whatever port you are using) 19 200 bits/sec 8 data bits No parity 1 stop bit No flow control