Common questions

What is ESTAPOL 7008?

What is ESTAPOL 7008?

Wattyl Estapol Flooring 7008 is an exceptionally hard and durable clear coating ideally suited for interior timber surfaces where extreme resistance is required.

How do you apply Estapol 7008?

Mix equal parts of ESTAPOL® 7008 Part A & B in a clean metal container. Stir thoroughly and let stand a minimum of 5 minutes before use. Apply two (2) to four (4) coats by Wattyl applicator or brush. Lightly sand between coats.

What is ESTAPOL used for?

Estapol Polyurethane is a touch, durable finish which is resistant to wear, normal household chemicals and moderate heat. It produces a warm honey tone on interior timber and is suitable for furniture, doors, windows and skirting boards. Tough, durable finish.

How long for ESTAPOL to dry?

Allow no less than eight (8) hours to dry between coats. For Natural Oil Finish apply 2 coats of ESTAPOL® Polyurethane Matt (as per above) and allow an additional 48 hours to dry.

Is Estapol waterproof?

Its totally waterproof and requires no upkeep except a wipe with a sponge. With oil I’d be worried that it would get differential (for want of a better word) staining.

Can you spray Estapol?

Wattyl Estapol Polyurethane may be applied by brush, speed brush, or spray equipment.

What should I seal my dining table with?

Polyurethanes are good sealants for wood dinner tables or gaming tables because they block spilled water, milk, greasy food and alcoholic beverages from seeping through to the wood beneath. The downside to polyurethane is that the coating may form a cloudy, plastic-looking film over the wood that can yellow as it ages.

Can you buy varnish in a spray can?

All these types of varnish are available in spray cans, but you can also use spray equipment. If you do, choose a compressed air gun over an airless sprayer. You’ll need the extra control it gives.

How does Pu cure?

Polyurethane varnish is considered “cured” when the molecules throughout the application have had a chance to chemically interact with oxygen, a process that allows the molecules to bind together more strongly. Each polyurethane finish coat will bind to the coat underneath during curing.

What kind of coating is Estapol 7008 for?

ESTAPOL® 7008 is a two pack polyurethane, high gloss clear coating, ideally suited for interior wood surfaces where extreme resistance and durability is required. PRINCIPAL CHARACTERISTICS Suitable for interior use only. Outstanding hardness and durability.

How long does it take to premix Estapol 7008?

Premixing also rapidly seals in waxes and resins, since the first coat is wet for a very short time. Mix equal parts of ESTAPOL® 7008 Part A & B in a clean metal container. Stir thoroughly and let stand a minimum of 5 minutes before use. Apply two (2) to four (4) coats by Wattyl applicator or brush.

What kind of flooring is Mitre 10 Estapol?

Wattyl Estapol Flooring 7008 is an exceptionally hard and durable clear coating ideally suited for interior timber surfaces where extreme resistance is required. Many Mitre 10 stores offer a local delivery service.