What does a John Deere 310sg weight?
What does a John Deere 310sg weight?
13500 lbs
Operating Specifications
| Alternator Supplied Amperage | 65 A |
|---|---|
| Oil System Fluid Capacity | 3.5 gal (13 l) |
| Operating Voltage | 12 V V |
| Operating Weight 2wd | 13500 lbs (6,124 kg) |
| Operating Weight 4wd | 13500 lbs (6,124 kg) |
How heavy is a John Deere backhoe?
Compare Backhoe Models
| Model | Net Peak Power | Operating Weight |
|---|---|---|
| 410L Backhoe | Net Peak Power 87 kW (116 hp) at 1,900 rpm | Operating Weight 8,068 kg (17,786 lb.) |
| 710L Backhoe | Net Peak Power 110 kW (148 hp) at 2,240 rpm | Operating Weight 11,607 kg (25,588 lb.) |
How much does a John Deere 300 backhoe weight?
John Deere 300B
| Dimensions & Tires | |
|---|---|
| Wheelbase | 77 inches 195 cm |
| Weight | 7450 to 10650 pounds |
| Full dimensions and tires … |
How much does a standard backhoe weight?
You can expect an average backhoe weight to be about 15,000 pounds (6,803 kg). This is about 5 times the weight of an average car. Generally the heavier a backhoe is, the more weight it can handle.
How much can a John Deere 310 backhoe lift?
Specification
| Engine | ||
|---|---|---|
| MAKE | John Deere | |
| BUCKET WIDTH | 86 in | 2184.4 mm |
| BUCKET BREAKOUT FORCE | 8497.8 lb | 37.8 kN |
| LIFT CAPACITY AT FULL HEIGHT | 6206 lb | 2815 kg |
How much does a John Deere 410g weigh?
Operating Specifications
| Alternator Supplied Amperage | 90 A |
|---|---|
| Operating Weight 2wd | 1628 lbs (739 kg) |
| Operating Weight 4wd | 1262 lbs (572 kg) |
| Rear Axle Fluid Capacity | 4.2 gal (16 l) |
| Tire Size Front – 2wd / 4wd | 11L-16 F3 |
How much weight can a backhoe pick up?
Its backhoe can dig with 15,200 pounds (67.6 kN) of force and can reach more than 25.9 feet (7.9 meters) away. The loader can lift loads up to 8,760 pounds (3,970 kg) and can hold 1.75 cubic yards (1.3 cubic meters) of dirt in its standard bucket.
How big is a backhoe fuel tank?
Service Refill
| Cooling System – A/C | 4.2 gal (16 l) |
|---|---|
| Fuel Tank | 34 gal (129 l) |
| Hydraulic System | 21 gal (79 l) |
| Hydraulic Tank | 10 gal (38 l) |
| Rear Axle | 6.4 gal (24 l) |
How much weight can a backhoe lift?
The loader can lift loads up to 8,760 pounds (3,970 kg) and can hold 1.75 cubic yards (1.3 cubic meters) of dirt in its standard bucket.
How much weight can a backhoe tow?
As long as you don’t gross over 26,001 lbs you are fine. You said if ” dually weighs in at 9,000 lbs and you are pulling a trailer that weighs 17,000 lbs”.
How much does a 580 Case backhoe weight?
14250 lbs
Operating Specifications
| Alternator Supplied Amperage | 90 A |
|---|---|
| Oil System Fluid Capacity | 3.6 gal (14 l) |
| Operating Voltage | 12 V V |
| Operating Weight | 14250 lbs (6,464 kg) |
| Operating Weight 2wd | 14285 lbs (6,480 kg) |
When did the John Deere 310g backhoe loader come out?
John Deere 310G The John Deere 310G is a 2WD or 4WD backhoe loader tractor manufactured by John Deere from 2001 to 2007.
How tall is a John Deere backhoe loader?
John Deere 310G Specifications Model John Deere 310G Length 7,080 mm (278.7 in) Width 2,180 mm (85.8 in) Height 2,740 mm (107.9 in)
What kind of engine does a JD 310g have?
This engine produced 79.8 PS (58.7 kW; 78.7 HP) at 2,000 rpm of output power. The JD 310G is equipped with hydrostatic power steering, hydraulic wet disc brakes, ROPS or cab with heat and A/C (optional) and 136.3 liters (36 US gal.; 30 Imp. gal) fuel tank.
What kind of engine does a John Deere backhoe have?
The John Deere 310G is equipped with one of two engines: a 4.5 L (276.0 cu·in) four-cylinder natural aspirated diesel engine or a 4.5 L (276.0 cu·in) four-cylinder turbocharged diesel engine and a transmission with 4 forward and 4 reverse gears. The tractor could be equipped with the following engines: John Deere 4045D.