Helpful tips

Are bathtub stoppers universal?

Are bathtub stoppers universal?

Universal Lift Bathtub Drain Stopper It is called a universal lift bathtub drain stopper because it can be used on all bathtub drains. It is also very easy to use. All you have to do is lift it out of the drain hole when you want the water to flow.

How do I stop my tub from draining water?

Place the cloth or sponge inside a plastic sandwich bag. Squeeze as much air out as you can and zip it closed or use a rubber band to secure it. Stuff the bag into the drain. The material should expand to snugly fill the hole, and the plastic bag will prevent water from escaping down the drain.

What can I use to plug a bathtub drain?

A plastic bag filled with water and sealed makes a quick drain plug. Use a storage or sandwich bag and fill it with water, closing the seal. You can also tie a plastic bag that doesn’t seal by wrapping a rubber band around the ends to keep it closed. Set the water-filled bag directly over the drain and fill the tub.

How do you measure a bathtub drain flange?

Measure straight down from the center of the overflow to the point at which the drain is mounted to the tub: depending on what’s easiest to get to, you can measure from outside the tub down to its underside, or from inside the tub to the tub floor. Do not follow the curve of the tub; measure straight down.

How do you remove a push down tub stopper?

Remove the knob on the top of the stopper. Hold the body of the stopper in place with one hand and with the other hand unscrew the knob by turning it counter-clockwise. If the knob will not unscrew, then wrap the rag around the knob and use the pliers to help remove the knob.

What kind of bathtub drain does Watco use?

Tubular Plastic Bath Waste with Lift and Turn Closure in Oil-Rubbed Bronze 500 Series 16 In. Tubular Plastic Bath Waste with Foot Actuated Bathtub Closure in Oil-Rubbed Bronze

Is there a WATCO push pull bathtub stopper?

Installed 48750-PP-CP-G-C but water leaks very slowly. Can the stopper be tightened to obtain a Watco can be reached at 1-800-308-0864 to assist. Watco, The Choice of Professionals and Always a Step Ahead.

Who is Watco Manufacturing Company, always a step ahead?

Watco Manufacturing Company | Always a Step Ahead | Bath Drains Waste| Lavatory Drains and Trim Kits.

Where is Watco Manufacturing Company in Independence Mo?

Watco Manufacturing Company A Division of WCM Industries,…

Powell Road Independence, MO 64057-2724 USA Phone 816.796.3900 Fax 816.796.0875 Sales Email: [email protected]. Copyright © 2020 · All Rights Reserved · Division of WCM Industries Inc.