Where is the fuel shut off switch on 2002 Ford Explorer?

Here’s how to find and reset the switch:

1. On the Ford Explorer, the fuel pump shut-off switch is located in the passenger’s footwell, by the kick panel.
2. Make sure to turn off your vehicle.
3. Pushing in the Fuel pump shut-off (inertia) switch.

Where is the fuel pump shut off switch location?

Look for the fuel pump switch or inertia switch. This is a small box with a plastic button on top and an electrical connector at the bottom. On some vehicle models, this will be located in the luggage compartment. Look on a side panel for a small, round button which you can pry off with a small screwdriver.

How do you reset the fuel pump on a Ford Explorer?

To reset the fuel light on a ford explorer you will need to access the fuel reset switch which is located in the glove box or in the foot well of the passenger seat area, press that switch and the fuel system will be reset.

What are the signs of a faulty fuel pump?

Seven Signs Your Fuel Pump Is Going Out

• Sputtering Engine. Your fuel pump is telling you something if your engine starts to sputter once you’ve hit the top speed on the highway.
• Overheating Engine.
• Low Fuel Pressure.
• Power Loss.
• Surging Engine.
• Gas Mileage Decrease.
• Dead Engine.

How do you reset a fuel pump control module?

These switches are generally designed for a quick reset, but some models may require a more involved approach.

1. Locate your car’s inertial trigger or airbag control module.
2. Push the button on the inertial switch; it should be clearly marked as the fuel pump reset, and may be in a contrasting color to the case.

How do you reset a fuel pump switch?

RESETTING THE SWITCH

1. Turn the ignition switch OFF.
2. Ensure that there is no fuel leaking in the engine compartment, along any of the lines or at the tank.
3. If no leakage and/or odor is apparent, reset the switch by pushing the reset button on the top of the switch.

What causes a Ford fuel pump to shut off?

If your Ford ever fails to start or stalls on you suddenly, the first thing to check is the inertia fuel shut-off switch. The switch is designed to trip and cut power to the fuel pump in the event of a collision, but you can also trigger it by hitting a large bump or pothole as well.

Is there a way to reset the Ford fuel shut off?

To reset your Ford’s inertia switch, press down on the reset button. Although the location of the shut-off switch varies by year and model, Ford has stuck with a few common spots over the years.

Where is the shut off switch on a Ford truck?

Although the location of the shut-off switch varies by year and model, Ford has stuck with a few common spots over the years. If you own one of Ford’s pickup, SUV or van models, you can find the shut-off switch under the dashboard on the passenger or driver side, depending on what year it was built.