How do I configure routing and switching?

How do I configure routing and switching?

Step-by-Step Instructions

  1. Enable routing on the switch with the ip routing command.
  2. Make note of the VLANs that you want to route between.
  3. Use the show vlan command in order to verify that the VLANs exist in the VLAN database.
  4. Determine the IP addresses you want to assign to the VLAN interface on the switch.

What is network switch configuration?

A network switch (also called switching hub, bridging hub, and, by the IEEE, MAC bridge) is networking hardware that connects devices on a computer network by using packet switching to receive and forward data to the destination device.

Is a Layer 3 switch a router?

A layer 3 switch is both a switch and a router: it can be regarded as a router with multiple Ethernet ports and with switching function. Like traditional router, a layer 3 switch can also be configured to support routing protocols such as RIP, OSPF, and EIGRP.

What is router vs switch?

Difference Chart between Switch and Router

Switch Router
It connects multiple networked devices in the network. It connects multiple switches & their corresponding networks.
It works on the data link layer of the OSI model. It works on the network layer of the OSI model.
It is used within a LAN. It can be used in LAN or MAN.

What is basic configuration?

A basic system configuration consists of a single instance of the system running on an application server. The additional queues enable the system to send data to the external systems and receive data from the external systems by using queues.

What parameters do you need to configure a router?

There are several things that you usually need to configure to improve usability and security.

  1. A Network SSID for the wireless clients. ( wireless router only)
  2. Wireless channels (wireless router only)
  3. Admin password for router management.
  4. Password for the DSL link.
  5. Internal IP address ranges.
  6. Port Forwarding.
  7. DDNS.

What is basic difference between a router and a switch?

Key Differences Between Router and Switch A router connects different networks like two LANs, two WAN’s or LAN and WAN. Router operates on a Physical layer, a data link layer as well as network layer whereas, a switch operates only on data link layer and network layer. The main purpose of the router is to determine the smallest and best path for a packet to reach the destination.

Is a network switch and a router the same thing?

Switches and routers are both networking devices and the terms are often used interchangeably, but if you think they’re one and the same thing, you’re wrong. There’s actually a difference between switch and router, although not that obvious for the “uninitiated”.

Which is better a router or a switch?

In various types of network environments (MAN/ WAN), the router works faster compares to Switch. In a LAN environment, a switch is faster than Router. In Router, every port has its own broadcast domain. The switch has one broadcast domain except VLAN implemented. Router operations revolve around IP Addresses.

How do you set up an Ethernet switch?

Steps to Set up a Network Switch With a Router Step 1: Unplug all the power supplies of cable modem, network switch and wireless router. Step 2: Connect your modem to the telephone wire. Step 3: Plug the other end of the Ethernet cable connected with modem into your router’s WAN port.