Who approves below threshold reprogramming?

Internal reprogramming requires approval by USD (C) and Below Threshold Reprogramming ((BTR) actions are approved at the individual services and defense agencies levels. Internal reprogramming is moving funding around within a Program Element.

What are the four basic types of reprogramming actions?

The four major types of appropriation for reprogramming are Procurement, RDT&E, Operations and Maintenance (O&M), and Military Personnel.

How are below threshold reprogramming actions measured?

A. Below-threshold reprogramming actions are minor actions not otherwise requiring congressional approval that may be accomplished within the DoD Components and are measured cumulatively over the entire obligation availability of the appropriation.

What is appropriation reprogramming?

Reprogramming. Reprogramming is the use of “funds in an appropriations account for purposes other than those contemplated at the time of appropriation.” Specifically, when an agency reprograms funds, it is moving funds within an appropriation (i.e. from one “budget activity” to another “budget activity”).

What is above threshold reprogramming?

The BTR thresholds represent the cumulative amount that may be reprogrammed over the life of the appropriation. No BTR increase or decrease may exceed the above thresholds or 20 percent, whichever is less, of the appropriated level for each Procurement line item or RDT&E program element.

Who can approve the realignment of funds between activities?

THE PROGRAM MANAGER will approve the realignment. The program manager is able to approve this realignment because a reprogramming action is not required. If a reprogramming action is required, that meas the change will be substantial, in this case the program manager will not be qualified to approve the realignment.

What is the main difference between transfers and reprogramming?

These authorities allow the department to transfer or reprogram funds. A transfer involves shifting funds from one appropriation account to another, while a reprogramming involves shifting funds within the same account. DOD uses the term reprogramming action to describe both types of transactions.

What is an indefinite appropriation?

No Year Appropriations — Appropriations available for obligations for an indefinite period of time without fiscal year limitation. They are available until they are used up.

What does reprogramming permit DoD do with BA?

19Q: Reprogramming permits the DoD to: 19A: Use funds for purposes other than those originally intended by Congress. 20Q: Realignment of funds between activities that are below the level of control for that appropriations category does not require a reprogramming action.

Who can approve the realignment of funds between activities that are below the level of control for that appropriation category that does not require a reprogramming action?

What is the first step in solicitation phase?

39Q: The first step in solicitation and award is to: 39A: Notify industry that a contract need exists and identify parameters of that need.

What is a type of prior approval reprogramming action?

Approval for a Prior Approval Reprogramming Action (DD 1415-1) is obtained by letter from the congressional committees prior to implementation of the action. Senate Appropriations Committee (SAC) and Senate Armed Services Committee (SASC) approvals must be received in writing.

What happens when the RSSI threshold is too low?

The adjustment of the Roaming RSSI Threshold is a balance between when a radio will leave one site and look for the next, versus how often the radio will go into roaming. If the Roaming RSSI Threshold is too low, the radio will remain on a low signal strength site, even though there might be a stronger site available.

What’s the RSSI value for poor signal strength?

Any RSSI value lower than -80 dBm is considered poor signal strength. Based on the client implementation some clients consider -75 dBm as poor strength as well, and will start roaming to a better Access Point, so values in the range -70 to -80 dBm are client dependent.

Which is a good SNR or RSSI value?

-55db + -95db = 40db this means you have an SNR of 40, our general rule of thumb is that any SNR above 20 is good. RSSI (Received Signal Strength Indicator) is a more common name for the Signal value; meaning it is the strength that the device is hearing a specific device or signal.

What does RSSI stand for in wireless category?

RSSI stands for Received Signal Strength Indicator. It is an estimated measure of power level that an RF client device is receiving from an access point or router. At larger distances, the signal gets weaker and the wireless data rates get slower, leading to a lower overall data throughput.