How do I clean my Vitapur water cooler?

Clean with Vitapur water dispenser cleaning solution or mild soap and water mixture. For tough deposits, add vinegar and let soak until the deposits come loose. Then wash, rinse and dry throroughly.

How do you troubleshoot a water cooler?

For water cooler troubleshooting, follow these steps:

1. Remove the water bottle.
2. Drain the reservoir entirely by holding down both the cold and hot spigots.
3. Place a fresh bottle on the water cooler.
4. Watch for leaks.
5. Please place a large X on the faulty bottle and label it a leaker.

How do you clean a bottom loading water dispenser?

How to Clean a Bottom-Loading Water Dispenser

1. Turn off and unplug the machine.
2. Drain all water from the reservoir.
3. Add your bleach, vinegar, or cleaning solution to the water bottle and reattach it (so that the reservoir inside the machine fills).
4. Let the mixture sit inside the reservoir for at least 10 minutes.

Why is my liquid cooler not working?

Very often if your water cooler is not working, the problem can be traced to the power supply. So as a first step, check that it is properly plugged in at the wall and the mains power is turned on. If it is switched on but not dispensing water, the next step is to check your water supply.

How do I fix my water cooler not getting cold?

This is very easy to do: First, remove a few cups of water from your machine, then completely unplug your water cooler from the mains. We then suggest leaving your machine for 24 hours before switching it on again. After 24 hours, plug it back in and wait 6 hours for the water to adjust to a cooler temperature.

How long does water stay fresh in a water cooler?

Opened bottles put on a regularly sanitised water cooler (with a bayonet system, sealed reservoir, air filter) last up to three weeks. 3. Opened bottles not on a water cooler have a shelf-life of just three days.

How do you clean a Vitapur water dispenser?

1. Make sure the power switch is in the OFF position. 2. Remove the water bottle and bottle support collar. 3. Drain the reservoirs. (See Draining the Reservoirs, pg. 6). 4. Pour the water dispenser cleaner or a mixture of 0.3 gal / 1 L of vinegar minutes.

How to adjust the temperature of cold water in a Vitapur?

Operation 1. DISPENSING COLD WATER 2. DISPENSING HOT WATER 194˚ F / 90˚ C 3. ADJUSTING THE COLD WATER TEMPERATURE ² By turning the thermostat (H) at the back of the unit, the temperature can be adjusted. Turn the dial clock wise between the Min.

Where can I find the Vitapur use and care manual?

Before returning to the store, call Customer Service at 1-866-253-0447 Keep this manual and your sales slip together for future reference. You must provide proof of purchase for in-warranty service.

Why does Vitapur water dispenser have a support collar?

ANTI-LEAK BOTTLE SUPPORT COLLAR The bottle support collar on your water dispenser is engineered with a special anti-leak-proof system to prevent accidental loss of water, (flooding) as a result of inadvertently installing a defective water bottle. Unfortunately, not all water bottles are created equal.